Conference Papers
List of the Conference papers
Ziaulhaq Ahmadi, Mohammad Zabetian. "Chemiluminescence for estimating heat release of perforated burners used in condensing boilers", The 8th Fuel and Combustion Conference of Iran, Tabriz, Iran, 2020.
Nima Ghorbani, Mohammad Zabetian Targhi, Mohammad Mahdi Heyhat. "Numerical Study of Thermal-Hydraulic Performance of Wavy Microchannels for Electronic Cooling Application", The 28th Annual International Conference of Iranian Society of Mechanical Engineering, Tehran, Iran, May 2020.
Marzie Yaghubi, Mohammad Zabetian Targhi, and Seyed Ali Tabatabaei, "A Numerical Study of Effect of Cross-Section in Spiral Microchannel to Cell Separation", The 28th Annual International Conference of Iranian Society of Mechanical Engineering, Tehran, Iran, May 2020.
Ghassem Heidarinejad, Mohammad Zabetian Targhi, and Seyed Ali Fatemi. "Optimization the parameters of a heat pump connected to solar collectors for efficient heating", The 28th Annual International Conference of Iranian Society of Mechanical Engineering, Tehran, Iran, May 2020.
Nima Ghorbani, Mohammad Zabetian Targhi, and Mohammad Mahdi Heyhat, "Experimental Study of Thermal-Hydraulic Performance of a Novel Microchannel Heat Sink for Electronic Cooling Application", The 28th Annual International Conference of Iranian Society of Mechanical Engineering, Tehran, Iran, May 2020.
Ali Heydari and Mohammad Zabetian Targhi "Numerical study on the beating tail of a micro-organism and the effects of geometric and wave parameters on its motion", 5th national conference on mechanical and aerospace engineering, Tehran, Iran, Jun 13-14, 2020.
Ali Heydari and Mohammad Zabetian Targhi. "Numerical investigation of 2D synchronized swimming using the finite element method (FEM)", Second National Conference on Micr0/Nano Technology, Ghazvin, Iran, Sep 2020
Mohammad Zabetian, Y.Oghabneshin, E.Partovi, M.Nahvi, and N.Ghorbani. "Training of Infrared, Laser Induced Florescence, Mechanical and Electrical thermometry methods by the interactive devices", 27th Annual International Conference on Mechanical Engineering-ISME2017, 2-4 May, 2019, Tehran, Iran.
S.L.Tabatabaei and Mohammad Zabetian. "Design and Numerical study of a microchip for separation of Biological", 27th Annual International Conference on Mechanical Engineering-ISME2019, 2-4 May, 2019, Tehran, Iran.
Y.Ali Hosseini, Mohammad Zabetian, M.M.Heyhat and A.Rezazad Bari. "Numerical simulation of fluid flow and heat transfer in oblique channels with rectangular cross-sections", 27th Annual International Conference on Mechanical Engineering-ISME2019, 2-4 May, 2019, Tehran, Iran.
Mohammad Zabetian, Y. Oghabneshin, M. Nahvi and E. Partovi. "The Training Methods of Measuring the Velocity and Flow of Gases Using Interactive Systems", 18th Fluid Dynamics Conference (FDC2019), 5-7 September 2019, Ferdowsi University of Mashad, Mashhad, Iran.
A.Ghasemipanah, Mohammad Zabetian, and L.Montazeri. "Geometrical design and analytical simulation of a microchip for inertial separation of high quality sperms", Second Conference on Microfluidics and Its Applications to Biomedical Engineering, Sharif University of Technology, March, 2018, Tehran, Iran
A.Ghasemipanah, Mohammad Zabetian, and L.Montazeri. "Experimental investigation of sperm separation for invitro fertilization applications, using inherent instincts of the fluid and sperm motility", 19th Congress on Reproductive Biomedicine & 14th Congress on Stem Cell Biology and Technology, August, 2018, Tehran, Iran. (The paper was awarded as the best poster of the congress).
S.Ebadati and Mohammad Zabetian. "Analytical Modeling of Laser Induced Thermophoretic Velocity and Thermal Diffusivity for Microparticles Suspended in Liquids", 25th Annual International Conference on Mechanical Engineering-ISME2017, 2-4 May, 2017, School of Mechanical Eng., Tarbiat Modares University, Tehran, Iran.
O.Zahedi, M.Sojoodi, Mohammad Zabetian, and M.Movahedin. "A short review on blood cells separation and sorting methods", 25th Annual International Conference on Mechanical Engineering-ISME2017, 2-4 May, 2017, School of Mechanical Eng., Tarbiat Modares University, Tehran, Iran.
R. Niroomand, Mohammad Zabetian, B. Sajadi, A. Ghasemi, and M.H. Saidi. "On the Energy Recovery in the Paint Booths", The Seventh International Conference on Heating, Ventilating and Air Conditioning, May 2016, Tehran, Iran
Mohammd.Zabetian, M.Rashidi, and R.Maddahian. "Design of an optical imaging and spectroscopy system for combustion measurement in internal combustion engines", Seminar on sensor science and technology, Sharif university of technology, November 2015,Tehran, Iran.
Keramati, Hadi, Mohammad Zabetian, Mohammad Hassan Saidi, and Ali Asghar Mozafari. "Experimental Characterization of Stabilized Suspensions Caused by Formation of Nanoparticle Halos." In International Conference on Nanochannels, Microchannels, and Minichannels, vol. 46278, p. V001T03A013. American Society of Mechanical Engineers, 2014.
R.Rohani, Mohammad Zabetian, M.H.Saidi, M.S.Saidi, and M.B.Shafii. "An experimental study on the stability and homogeneity of a dilute dispersion of micro-particles", 8th International Conference on Multiphase Flow, ICMF 2013, Jeju, Korea, May 26 - 31, 2013.
A.Ghasemi, Moahmmad Zabetian, B.Sajjadi, R.Niroomand, and M.H.Saidi. "A New Method for Optimizing the Air Circulation System in the Car Paint Booths", 21th Annual International Conference on Mechanical Engineering-ISME2013, 7-9 May, 2013, School of Mechanical Eng., K.N.Toosi University, Tehran, Iran.
Zabetian, Mohammad, Mohammad Said Saidi, Mohammad Hassan Saidi, and Mohammad Behshad Shafii. "Thermal interaction of laser beam with particulate flow in mini-channels." In International Conference on Nanochannels, Microchannels, and Minichannels, vol. 44649, pp. 355-366. 2011.
Mohammad Zabetian, M.H.Saidi, M.B.Shafii, and M.S.Saidi. "Laser induced flow in particulate media", 7th International Conference on Computational Heat and Mass Transfer, July 18-22, 2011, Istanbul, Turkey.
S.N.Saeidi, S.E.Kiaei, B.Sajadi, Mohammad Zabetian, and M.H.Saidi. "Experimental investigation of indoor airflow using PIV technique", Clima 2010 - REHVA World Congress, Antalya Turkey, May 9-12, 2010
Moahmmad Zabetian and A.Mozafari. "Combustion of natural gas in homogenous charge combustion compression ignition engines, analysis, oxidation mechanisms and controlling strategies", Conference on Applications and Design in Mechanical Engineering, 25-26 October 2007, Kangar, Perlis, Malaysia
M.H.Shojaefard, A.R.Noorpoor, Mohammad Zabetian, and M.Ghaffarpour. "Analysis of engine operating conditions on thermal behavior of piston", International conference on recent advances in mechanical and material engineering(ICRAMME2005), Malaysi, 2005.
Sasan Azarmanesh and Mohammad Zabetian Targhi. "Comparison of laser ignition and spark plug by thermodynamic simulation of multi-zone combustion for lean methane-air mixtures in the internal combustion engine." Energy 216 (2021): 119309.
Yousef Alihosseini, Mohammad Zabetian, and Heyhat Mohammad Mahdi. "Thermo hydraulic performance of wavy microchannel heat sink with oblique grooved finned." Applied Thermal Engineering (2021).